Izdelki za oprema in naprave (3)

PNEUMATIC CENTERING DEVICE WITH MOTORIZED ROLLERS (MOD. CP-FM) MANUFACTURERS VERSION Feeder - centering device useful for centering boxes max width mm. 650 and max weight kg. 50. Can be combined with automatic taping and labeling machines. The box centering machine mod. CP-FM consists of a motorized roller conveyor and two pneumatically operated side guides. The metal parts are painted with epoxy powder while the other components are galvanized. The pneumatic centering device with motorized rollers is a module for builders to be completed and adapted to an automatic line. It is available in two versions: Manufacturers version and "plug and play" version: In the "manufacturers" version, the centering device is supplied complete with: - Motorized roller conveyor with start and stop button and emergency mushroom, at a fixed speed of 15 meters / minute - Pneumatic tail lifts and compressed air system up to the gate movement management valve. Total length (mm):935 Total width (mm):950 Maximum box width (mm):650 Minimum box width (mm):160 (on request 120 mm) Minimum box height (mm):75 Conveyor rollers width (mm):780 Conveyor roller diameter (mm):48 Feed speed (m/min):15 Installed power (kW):0.37 Maximum load (Kg):50

In the back there are three handles, one located in the median part of the device, formed by two cordura straps, covered by a plastic tube, into which the weak forearm is inserted, with the hand that grasps the more peripheral handle. In the upper part, there is a horizontal handle, which will be gripped by the strong hand. At the bottom and at the top of the device are present a layer of high-density foam rubber for prevent the lexan sheets from hitting the operator or the subject being treated, causing unnecessary damage. The absorbent pack is formed by a series of layers of foam rubber, interspersed with a series of layers of lexan in order to slow down the penetration of a blade and retain it inside, so as not to allow easy reuse of the sharp object. The waterproof and washable cordura or nylon lining is equipped with a zipper in the lower edge that allows you to remove the absorbent pack stratified, for the cleaning of the same or the maintenance of the package. Rear:3 handle Upper part:horizontal handle Thickness:150 mm

BAG OPENER - BAGS OPENING DEVICE The Bag Opener is an opening device characterized by a regular and silent motorized fan and is designed to quickly pack and fill the bags. It consists of a stainless steel body suitable for contact with food and easy to clean. The bags with a hole for hooking are very easy to change and the constant air flow opens them easily one after the other. Fan with two-speed motor and on/off switch. Adjustable guides to facilitate filling. Attention: the collection of the bags takes place by tearing (naturally a small piece of bag will remain torn off). Airflow:550 l/min Power :50W Usable bag width :Max. 400 mm - Min. 160 mm Usable bag lenght :Max. 600 mm - Min. 200 mm Maximum recommended thickness :50 micron (0.05mm) Dimensions (mm) :400x675x150